High Precision 20mm Angular Contact Ball Bearing Steel 7204 AC Single Row
Angular Contact Bearing 7204 AC P4 Product description:
The installation of angular contact ball bearing is more complicated than that of deep groove ball bearing.
Well installed, can make the machine work accuracy, the bearing life greatly improves;
Otherwise, not only the precision can not meet the requirements, the life will also be affected.
Cage material available:
1, bakelite cage
2, nylon cage
3, steel cage
4, brass cage
Angular Contact Bearing 7204 AC P4 | bearing type | ISO bearing NO. | OLD bearing NO. | ID | OD | WIDTH | Cr | Cor | grease lubricated
speed | oil lubricated
speed | weight |
| cylindricall roller bearing | | | (mm) | (mm) | (mm) | (kN) | (kN) | (r/min) | (r/min) | (kg) |
| angular contact bearing | 7204C | 36204 | 20 | 47 | 14 | 15.5 | 9 | 24000 | 32000 | 0.112 |
| angular contact bearing | 7204AC | 462O4 | 20 | 47 | 14 | 14.5 | 8.4 | 17000 | 22000 | 0.112 |
| angular contact bearing | 7204B | 66204 | 20 | 47 | 14 | 13.3 | 7.7 | 13000 | 17000 | 0.112 |
| angular contact bearing | SN7204J | - | 20 | 47 | 14 | 10.1 | 8.05 | 13000 | 18000 | 0.0946 |
| angular contact bearing | 30204 | 7204E | 20 | 47 | 14 | 28.2 | 30.5 | 8000 | 10000 | 0.126 |
| angular contact bearing | 7204AC/DB | 246204 | 20 | 47 | 28 | 23.5 | 16.8 | 14000 | 17000 | 0.224 |
| angular contact bearing | 7204AC/DT | 446204 | 20 | 47 | 28 | 23.5 | 16.8 | 14000 | 17000 | 0.224 |
| angular contact bearing | 7204B/DB | 266204 | 20 | 47 | 28 | 21.6 | 15.4 | 10000 | 14000 | 0.224 |
| angular contact bearing | 7204B/DF | 366204 | 20 | 47 | 28 | 21.6 | 15.4 | 10000 | 14000 | 0.224 |
| angular contact bearing | 7204B/DT | 466204 | 20 | 47 | 28 | 21.6 | 15.4 | 10000 | 14000 | 0.224 |
| angular contact bearing | 7204C/DB | 236204 | 20 | 47 | 28 | 25.2 | 18 | 19000 | 26000 | 0.224 |
| angular contact bearing | 7204C/DF | 336204 | 20 | 47 | 28 | 25.2 | 18 | 19000 | 26000 | 0.224 |
| angular contact bearing | 7204C/DT | 436204 | 20 | 47 | 28 | 25.2 | 18 | 19000 | 26000 | 0.224 |
Angular contact ball bearings are installed in the form :
A: back-to-back
B: face to face
C: tandem arrangement.
Comparision of difference assemble method of angular contact bearing:
The contact Angle of the bearing is diffused along the axis of the rotary axis when the back to back (the wide end face of the two bearings) is installed, which can increase the bearing Angle rigidity of radial and axial direction and the maximum deformation resistance.
Face to face (the narrow end face of the two bearings), the contact Angle of the bearing is convergent towards the axis of rotation, and the Angle of the bearing is less rigid.
Because the inner ring of the bearing extends out the outer ring, when the outer ring of the two bearings is pressed together, the original clearance of the outer ring is eliminated, which can increase the preloading charge of the bearing;
In tandem arrangement (the wide end face of two bearings is in one direction), the contact Angle of the bearing is parallel to and parallel, so that the two bearings can share the working load in the same direction. However, in order to ensure the axial stability of the installation, the two tandem bearings must be installed at both ends of the shaft.
Product Tags:
|
|
High Precision 20mm Angular Contact Ball Bearing Steel 7204 AC Single Row Images
|
